Ga naar de hoofdinhoud

Trace oil stains with Five Whys

Use Five Whys to trace a recurring oil stain to a process-level corrective action.

textile-manufacturing5 min read

Oil stains are recurring on pale woven fabric after stenter processing, especially near one lane. Five Whys: trace event -> condition -> control failure -> process fix The common shortcut is to spot clean the fabric and tell maintenance to be careful. That treats the visible defect but leaves the lubrication condition and detection gap unchanged. Why 1 Why did the fabric stain? Fresh oil contacted the fabric near the stenter chain guide. Why 2 Why was oil at the chain guide? The guide had been lubricated at shift start and excess oil was not wiped. Why 3 Why was…

Read the full lesson

Sign up free: one personalized lesson every day, matched to your role and goals.

← Back to library

Neem contact op