Zum Hauptinhalt springen

Run Five Whys on an AI takeoff error

Diagnose an AI takeoff miss by tracing process causes rather than stopping at model error.

ai-for-construction5 min read

AI missed 420 linear feet of firestopping at shaft walls in a bid takeoff. Five Whys: symptom -> process cause -> control Stopping at "the AI missed it" feels satisfying but produces no new control. The next estimate can fail the same way. Why 1 Why was firestopping missing? The AI did not identify shaft-wall penetration scope. This names the failure mode without assuming the root cause. Why 2 Why did it not identify that scope? The relevant detail was on LS-602, which was not included in the upload. The problem starts moving from model output to source selection. Why…

Read the full lesson

Sign up free: one personalized lesson every day, matched to your role and goals.

← Back to library

Kontakt aufnehmen