Zum Hauptinhalt springen

Build a JHA for a PSV changeout

Create a job hazard analysis by breaking a maintenance task into steps, hazards, and controls.

oil-gas-operations5 min read

A crew must change a pressure safety valve on a produced-water vessel during a short maintenance window. OSHA JHA: job steps -> hazards -> controls The common trap is writing broad hazards and PPE lists while skipping the exact step where stored pressure, lifting, or line-of-fire exposure appears. Step 1 Break the job into observable steps: isolate, depressurize and verify, break containment, lift old PSV, install replacement, leak test, restore. The JHA starts with verbs. If the steps are vague, the hazards will be vague too. Step 2 For each step, name the specific hazard: trapped pressure before loosening, hydrocarbon…

Read the full lesson

Sign up free: one personalized lesson every day, matched to your role and goals.

← Back to library

Kontakt aufnehmen